8/30/09

FTU Barb's Scraps and Studio 43 - Haunted

This tutorial was written by me on March 10,2009. 
Any similarities to another tutorial is purely coincidental. 
All my tutorial are register with My Free Copyright . 
Please do not claim as your own. 
This is a very easy tut and simple to do......Enjoy!!




SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Studio43..
 You can purchase their tubes HERE at Up Your Art. 
Please do not use without a license to do so.

Scrapkit of Choice: I am using a FTU scrap kit Blue Suede 

from Barb's Scrap kits. 
Thanks Barb for the use of this awesome kit.

Frame of Choice: I'm using frame from Urban Fairytales 

you can download it HERE. Thanks Sunf

Font is Powderworks BRK and Pixelette... HERE


Drop shadow use throughout H-2/V-2/O-50/B-5


LET'S BEGIN 

Open up Image 600 x 600-flood fill white (we will resize later)
 Go to scrap kit and choose flower. 
Copy and paste on white background duplicate and flip. 
Merge layers down and add drop shadow.

Go back to scrap kit and choose diamond star. 
Copy and paste...duplicate and flip. 
Merge down and add drop shadow

open up your frame and copy and paste above star layer. 
resize if needed 
go to magic ward and click inside of both frames
Selection/modify/expand by 6
go to scrap kit and choose paper2.
copy/paste/selection/invert/delete/deselect. 

Place paper beneath frame 
close paper layer /take your magic ward
 select the bottom frame
modify by 6/ copy and paste tube
 (resize if needed)
invert and delete
 make sure tube is under frame but on top of paper

.Add drop shadow to frame and both tubes
. Repeat process with the house 
making sure house is under frame but on top of paper

add any embellishments 
you want to your tag to make it your own
Don't forget to add a drop shadow to each element
resize your tag if needed


add your copyright and watermark. 
Add name using the font Powderworks BRK or one of your own choosing. 
Pick two colors from your tag for the name and add drop shadow
You are done.........Thank you for trying my tutorial

FTU Blue Bird Scraps and Jessica Doughtery - Here's To Our Love

This tutorial was written by me on January 7, 2009.
 Any similarities to another tutorial is purely coincidental.
 All my tutorial are register with My Free Copyright . 
Please do not claim as your own. This is a quick and easy tut.



SUPPLIES NEEDED


Tube of Choice: I am using the awesome artwork of Jessica Dougherty. 
You can purchase her tubes HERE
Please do not use without a license to do so.

Scrapkit of Choice: I am using a FTU scrap kit Red Hot Romance 
from Scraps by BlueBird. You can find it HERE
Thanks BlueBird for the use of this awesome kit.

Template of Choice: I'm using one from Butterfly flutterby Creations 
and you can download it HERE. Thanks Butter

Mask of Choice:  I'm using a Weescotslass Creations
put in your mask folder - WSL Mask #12 HERE

Glitter of Choice: I used a red glitter by Scrap Rebellion
You can get it....HERE


font is Elegant... get it..... HERE


LET'S BEGIN

Open up template - shift D and close original. 
Delete credits and resize all layers except background 80%. 
Close all layers except background layer.
 Copy and paste paper1 above background
go to layers / load mask from disc and find your mask.
load with these setting


right click on your layer palette and merge group.
 duplicate mask layer twice and merge down 
each time to make mask darker.
activate shape layer/select all/float/defloat
copy/ paste paper of choice ( I used glitter red)

 if you use this - 
open in psp then click on pattern angle 0- scale 140
 apply to shape and merge down
 drop shadow H-2/V- -2/ O-50/B-5
 do back label- Swirl- 3 hearts and label layers
(same as above with paper of choice) 

Add white bow to hearts/resize to fit/copy 
and paste 3 roses underneath letter. 
resize to fit/add drop shadow
 I used the same glitter to pen and edges of the hearts on notepaper
 you do what's right for you-your choice.

Copy and paste your tube and resize to fit. 
add drop shadow. 
Go to font of choice and write Here's To Our Love 
or use your own saying.
I also wrote I Luv you on the heart of the note paper - your choice again.
crop to remove excess white and resize to your liking 

Add copyright and watermark 
you can add your name or someone else 
and save as png. You're Done
THANKS FOR TRYING MY TUTORIAL!!!

FTU Always Creations and Ismael Rac - Electric Rock

Along with making the scrap kit Electric Rock... 
I made a tutorial to go with it. Enjoy.




 This tutorial was written by me on July 27, 2009. 
Any similarities to another tutorial is purely coincidental.
Please do not claim as your own.
This tutorial is My Free Copyright . 
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9, 
but can be adapted to use in other Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Ismael Rac..
You can purchase his tubes....HERE
Please do not use without a license to do so.

Scrap kit of Choice: I'm using my own scrap kit 

Electric Rock. you can download it... HERE 
HERE...HERE....HERE-4part download
Please do not share- please direct to my site.

Mask of Choice: I'm using WSL MASK #336 from Weescotslass

 place in your mask folder in psp. 
You can get it from HERE
Thanks for the use of your mask Chelle
Template of Choice: I'm using my own Template #11. 
You can get it ..... Here
 Please do not share, please TOU
Font for text and name is Park Avenue 
copy write is always done in Pixelette ... HERE

Drop shadow use throughout H-2/V-2/O-50/B-2

LET'S BEGIN
Open up template and duplicate/close original 
(we will resize later). x out all layers except background. 
Go to scrap kit and choose paper #4/resize to fit canvas. 
Copy and paste above white background. 
go to layers/load/save mask./load mask from disk
with these setting

Click ok/Merge group down
add raster layer and choose electric glitter #5.... 
copy/paste glitter and duplicate 3x....
arrange to your liking.... activate the square layer
 click inside square with magic wand 
go to kit and choose paper of choice ( I chose paper #16) 
and paste as a new layer/Selection invert and delete. 
add drop shadow...Activate frame 
using magic wand click inside of frame/color black
drop shadow/activate electric rock background layer
 add tube of choice/drop shadow
activate first musical note 
add a white gradient glow effect with the following setting



make sure it's underneath tube.
 unclick first star layer-using magic wand click inside
/selection/modify by 1......copy/paste paper #8
invert/delete / merge down/add drop shadow 
using magic wand again click inside next star. 
Choose paper#12/paste as a new layer/repeat process. 
Activate third star/choose paper #20 
paste as a new layer/repeat process again. 
add music staff/drop shadow/place underneath tube. 
activate 2nd musical note/add gradient glow to this one also. 
add microphone/add drop shadow
/add text word Electric Rock and give it a drop shadow. 

resize if needed/add copyright and your watermark
be nice and put a friend's name on it /now you're done.
Thank you for trying my newest tutorial.


Here's another tag using a different tube


FTU Scrappy Bit of Fun and Suzanne Woolcott - Lonely

Here's another tut I wrote...Hope you enjoy....I had a lot of free time lol.





This tutorial was written by me on February 09,2009. 
Any similarities to another tutorial is purely coincidental. 
Please do not claim as your own.
This tutorial is protected with My Free Copyright . 
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro. 
This tutorial was done in Paint Shop Pro9, 
but can be adapted to use in other Paint Shop Pro versions.


SUPPLIES NEEDED


Tube of Choice: I am using the awesome artwork of Suzanne Woolcott.. 
You can purchase her tubes Here at Gorjuss Art. 
Please do not use without a license to do so.

Scrapkit of Choice: I am using a FTU Scrap kit from Simone's

Scrappy Bit of Fun. you can find it HERE.
 Click on the color preview strip and get the kit.
Thanks Simone for the use of this awesome kit.

Mask of Choice: I am using Sweetmask #9 

from Sweetstuff- place in your mask folder in psp.


Template of Choice:  I am using Created by Jill. #7

You can get it Here. Thanks Jill for the Share.



Font for name is Pricedown 
 copy write is always done in Pixelette
 Please Google for them.

Drop shadow use throughout H-2/V-2/O-50/B-5
Plugin used : dbs flux-Bright Noise


my tutorial is just a guide.

you don't have to use what I used
be creative and use your imagination 
to make your tag a little different


LET'S BEGIN
Open up Template and flood fill background white

 (we will resize later)
x out all layers except background. 
Go to scrap kit and choose paper #4. 
Copy and paste above white background.
 go to Layers...load/save mask...load mask from disk






Merge group down and Lower Opacity to 50% 
duplicate twice...do not merge...you should have 3 layers
Go to kit and copy blossom branch #2/resize if need 
and place underneath mask...duplicate and mirror
make one lower than the other.

unclick Big Wave and using magic wand click inside
copy and paste paper #7/Selection invert and delete. 
add drop shadow/unclick medium wave 
using magic wand again click inside.

 Click on color preview and choose the beige color 
with dropper and flood fill wave with that color. 
unclick wave line and using magic wand click inside
 go to kit and choose paper#5 
paste /selection/invert/delete
now add the same drop shadow

unclick diamond lines selection/float/unfloat
 and copy/paste paper #4...then selection/invert/delete
duplicate two times and do not merge
you should have three of these layers. 

unclick frame...now go and copy frame #3 
 paste over frame...merge down
using deform tool shape your frame in an oval shape

using magic wand click inside
choose paper #4/selection/invert/delete
 place paper under frame/drop shadow the frame

now place your tube on top of frame letting her legs swing down
 (choose the tube without the letters) 
drop shadow tube...place the flower ribbon
 #F2 in the upper right side add a drop shadow.


Now it's time to add some animation....
You have three mask layers...
x out the bottom two and 
on the top layer go to dbs flux bright noise 
and copy the following shown below



On the top layer use 30 and click once
On the middle use 30 and click twice
On the bottom use 30 and click three times




USE THESE SAME SETTING FOR THE 
THREE DIAMOND LINES LAYERS TOO

resize your tag before you place 

your copyright information and watermark on it
add a friends name as a gift

NOW LET'S GO TO ANIMATION SHOP AND FINISH OUR TAG


close off the bottom and middle layers of

 the mask and the diamond layers.
 Copy merge and take over to AS
 and paste as a new layer..
.go back to PSP and click the two top 
layers and unclick the two middle layers...
Copy merge and take to AS and
 paste after current layer...Go back a last time
 and click the two middle layers and unclick the 
two bottom layers...Copy merge and
 take to AS and paste after current layers
Save as a gif and you're done!!! 


Hope you enjoyed doing my tutorial
If you use send me a copy at riggsbee53@gmail.com

FTU Heartfelt Scraps and Suzanne Woolcott - Tweet

This tutorial was written by me on April 09,2009. 
Any similarities to another tutorial is purely coincidental. 
Please do not claim as your own.
This tutorial is register with My Free Copyright . 
This tutorial writer assumes you have a working
 knowledge of using Paint Shop Pro. 
This tutorial was done in Paint Shop Pro9, 
but can be adapted to use in other Paint Shop Pro versions.





SUPPLIES NEEDED
Tube of Choice: I am using the awesome artwork of Suzanne Woolcott..

 You can purchase her tubes HERE at Gorjuss Art. 
Please do not use without a license to do so.

Scrap kit of Choice: I am using a FTU Scrap kits from Heartfelt Scraps. 

Thanks Melissa for the use of this awesome kit.

Mask of Choice:   I am using Weescotslass Creations #14

- place in your mask folder in psp. 
You can download from her site HERE.....Thanks Chelle

Word art of Choice:  I am using Sophisticat Simone word art

You can get it Here. Thanks Simone for the word art.

Template of Choice: I am using one of mine
If you would like to use it
Please do not claim as your own 
read TOU enclosed
you can get it Here



Font for name is Monika 
and copy write is always done in Pixelette
  Get them....HERE and HERE

Drop shadow use throughout H-2/V-2/O-50/B-5 

Remember my tutorial is just a guide.
You do not have to use the materials  I used
Use your imagination. Make your tag your own


LET'S BEGIN

Open up Template and flood fill background white
 (we will resize later)x out all layers except background.
 Go to scrap kit and choose paper of choice.
 Copy and paste above white background. 
go to Layers...load/save mask...load mask from disk



Merge group down and duplicate once
merge down/uncheck large rounded rectangle 
using magic wand click inside rectangle.
 Copy and paste choice of paper...selection/invert and delete.
Merge down and add drop shadow

Uncheck medium strip
using magic wand click inside 
choose paper of choice/copy/paste
selection/invert and delete
merge down and drop shadow

Uncheck small strip...using magic wand click inside
 choose paper of choice...copy/paste
selection/invert and delete
merge down and add drop shadow

go and choose frame of choice
copy /paste on top of large rectangle 
also choose which ever frame corner you like
 copy and paste in the corner of frame 
add drop shadow to both.

using magic wand click inside of photo frame
 copy/paste tube and resize 2 times by 80%
go to selection invert/delete drop shadow tube
color your bird to match your tag/tube
add drop shadow 

unclick sun and go to selection/float/unfloat
 and color it in color of choice
I used a light yellow go to kit
  choose lace flower of choice and copy on top of sun
resize by 80% and add drop shadow

paste your word art and place where you want it
use magic wand and click inside of the letter
 "Tweet"and choose paper of choice
selection/invert/delete
merge down and drop shadow.
resize your tag so that it's not too big

Add watermark and copyright
Give your tag to a friend
You are done.........Thank you for trying my tutorial

If you use this..please send me a copy
so I can show case on my blog
send to riggsbee53@gmail.com

FTU Sophisticated Style Scraps and David Boller - Evil Shouldn't Look This Good

I decided to try my hand at writing a tutorial and 
here's what I came up with. It's a easy tutorial to do
 and I love the way it turned out. Hope you like it.
 Please abide by my TOU located with supplies....
Thanks...All tutorials are register at My Free Copyright .




SUPPLIES NEEDED
Tube of Choice. I am using the beautiful artwork of David Boller.

It is a license tube and you can purchase it at Up Your Art - HERE
Please do not use his artwork unless you have a license to do so...Thanks

Scrap kit of Choice: The scrap kit I am using is a 

FTU Kit from Sophisticated Style Scraps. 
It's an old kit called Intensity  
Thank you Melissa for the use of this scrap kit.

Template of Choice:  I'm using Sophisticat Simone #44: 

Get it from her site HERE....Thanks Simone

Mask of Choice: I'm using Weescotslass Creations #4

 - place in your mask folder in psp.
You can download from her site HERE.....Thanks Chelle

Word art of Choice: Or you can use mine

 Please do not remove credit or 
use anywhere else without permission.
You can get it HERE



font of choice: - I used Eraser Dust 
 Drop Shadow H-V-2/O-50/B-5/C/Blk
 for all scrap pieces
For Tube Use same settings above then change H-V to-2
Colors for word art #721405/ #ad6e2a
 Gradient (depending on what scrap kit and colors you choose)



LET'S GET STARTED


Open template in psp/Shift D and close original. 
close all layers except background/add new raster layer 
copy paste paper or color from your tube. 
Go to mask from disc and look for your mask 
upload with the following settings




back to layers merge group/copy/paste different paper
from your kit or color (using color from your tube) 
all the layers in your template to your liking. 
give each layer a drop shadow except your background and your mask. 
Add your tube and position where it would look best.
 Add drop shadow to your tube.
Add any elements to your tag and add drop shadow.
 Open up the word art and give it a background color of choice 
or use a two tone paper, merge layers 
 add a border in a matching color.
Add inner bevel to border with the following setting



Position on tag where it will look best.

Crop all layer to get rid of excess white 
and resize to your tag so it's not to big.

now is the time where you can make your tag your own
my tutorial is just a guide,do something different with yours

Add your copyright and watermark. 
and add your name or give as gift using font of choice. 
Save as png. You're Done!!!! 
Thank you for trying my tut.

Here's another version

 

8/6/09

No Scrap Tutorial - Michael Landfeld

This Babe Wants To Rock

Here's another tutorial I wrote.This is a great tutorial for a beginner.
Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright. 
Please do not claim as your own.This tutorial writer assumes you
have a working knowledge of using Paint Shop Pro. 

This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other Paint Shop Pro versions.





SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Michael Landefeld..
You can purchase his tubes HERE
Please do not use without a license to do so

Template of Choice: I'm using Wicked Scraps template#34..You can find it HERE
Thanks Kristin for the use of your work.

Mask of Choice: I am using Sue's Creations Mask#26..Sue is no longer on the net right
now so please use another mask

Font for name is Garamond
  and copyright is always done in Pixelette ... Get them HERE

Drop shadow use throughout H-2/V-2/O-50/B-6.72

  
     LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer
close all layers except the background layer...the one we'll be working on

Go to layers/new raster layer/click ok.Flood fill this layer with color from
your tube. I chose 41578d...

Go to layers/load/save mask/load mask from disk...find your mask and set it with
these setting....

layers/merge group

Activate circle layer/click on magic wand...mode-add/match-RGB value/Tolerance 10
contigous checked/feather 0/anti-alias checked/inside

Choose a color from the tube...I chose f8d56d. flood fill circle with this color.
...add a drop shadow

Activate the bars and repeat the same process as the circle layer
from the kit...I chose 41578d

I left the musical notes as is and the stars I color one the same as the circle
and the other one the same as the bars

actvate the word layer/selections/select all/float/defloat and color it the
same color as the bars

Add your tube where ever you want to place it.

add a drop shadow on all layers

add your copyright and watermark and your done

Thanks for trying my tutorial
If you use send me a copy so I can show case it...thanks