4/27/12

FTU Cocotounette Designs and Joel Adams

Spring Fae

This tutorial was written on April 20,2012.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.
SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Joel Adams.

Please do not use unless you have a license to do so.
You can get his tubes HERE

Scrapkit of Choice: I am using Cocotounette Designs Scrap kit

Called Souffle Fleuri...You can download it HERE
Thank you

Mask of choice:I am using Urban Fairytale mask #53

You can download it HERE...Thank you Sunf

Frame of Choice: I'm using a frame from Urban Fairytales

called short frame crupmple...You can get it HERE
Thanks Sunf

Filters used:Eye Candy 4000 gradient glow - HERE


Font for Name is Bunchlo...HERE

Copy write is always done in Pixelette ...HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00


Please leave a thank you when you downloading for supplies.

Please Read all Terms Of Use

my tag is just a guide...please use your imagination

and make the tag your own you do not have to
use any of the supplies I used.

     LET'S BEGIN

copy/paste paper of choice/and put underneath background layer

go to mask of choice with these setting and click ok

Open up Frame/ShiftD and closed original/remove copyright

information/click inside the sections of the frame/selections
modify/contract by 10%/copy/paste paper of choice/resize if
needed/go to frame layer/selections/invert/paper layer/delete
change color of paper to match tube choice

close paper layer for now/magic wand/click inside left lower

portion and middle area/selections/modify/expand by 12%/copy
paste your tube on left hand side/make sure it covers the small
lower portion and half of the left side(see my tag for reference)
on frame layer/selections/invert/on tube layer delete/duplicate
tube layer/on original layer/blend luminance legacy/on duplicated
layer/lower opacity to 66%/place this layer underneath original
layer/selection/none/add drop shadow to both/close both layers
for now

magic wand/click inside upper right portion and middle portion

selections/expand by 12%/copy/paste tube again/this time resize
tube by 120%/selections/invert/tube layer/delete/duplicate tube
on original layer/blend/screen/on duplicated layer/place under
neath original tube layer/selections/none/add drop shadow to both
open up the lower selections

now add any other element you wish to use to make your tag your

own/add drop shadow on each element

copy/paste your main tube and place where it will look best/add

drop shadow

add your watermark and copyright credits/give it a slight gradient

glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial

please send me a copy so that I can show case it on my blog
send to....riggsbee53@gmail.com



FTU Sweet Angel Scraps and Kris Goat

SHHH......

This tutorial was written on April 19,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Kris Goat.
Please do not use unless you have a license to do so.

Scrapkit of Choice: I am using Sweet Angel Scraps Scrap kit
Called Sweet Sexy Girl's Club
Thank you

Mask of choice:I am using Weescotlass PSP mask #366
You can download it HERE...Thank you Chelle

Template of Choice: I am using Divine Intentionz -Template #118
You can download it HERE....Thank you Missy

Filters used:Eye Candy 4000 gradient glow - HERE
VM Extravaganza-Color fusion...HERE

Font for Name is Organic Elements...HERE
Copy write is always done in Pixelette ...HERE


Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.
Please Read all Terms Of Use

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting


and click ok/delete background layer

On the following raster layers follow these directions...

select your tube/you want your tube and scrap kit to
coordinate each other/just put it on the side for the time
being so that it is available when you need it.

activate circle layer/you should see marching ants surrounding
it/copy/paste paper of choice/resize paper if it's to big by 60%
go to circle layer/selection/invert/go to paper layer and delete/
layers/merge/merge down/selection/none/keep selected/copy/paste
tube on top/resize by 80%/effects/VM Extravaganza-Color fusion
with these setting...


click ok/add drop shadow to circle and tube

activate thin rectangle1 layer/copy/paste paper of choice/go to
thin rectangle1 layer/invert/go to paper layer and delete/merge
down/add drop shadow

add element to this layer if you chose/resize to fit and add drop
shadow

activate thin rectangle2 layer/copy/paste paper of choice go to
thin rectangle2 layer/invert/go to paper layer and delete/merge
down/add drop shadow

activate thin rectangle3 layer/copy/paste paper of choice go to
thin rectangle3 layer/invert/go to paper layer and delete/merge
down/add drop shadow

copy/paste another element of choice/resize to fit/add drop shadow

activate thin rectangle4 layer/copy/paste paper of choice go to
thin rectangle4 layer/invert/go to paper layer and delete/merge
down/add drop shadow/put this layer underneath rectangle3.

activate rectangle layer/copy/paste paper of choice go to
rectangle layer/invert/go to paper layer and delete/Keep activated
copy/paste your tube/resize if needed/add drop shadow

now add any other element you wish to use to make your tag your
own/add drop shadow on each element

you can either add a word art to your tag or not...it's up to you

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....riggsbee53@gmail.com

4/23/12

FTU Fantasy Moments and Della Lindsey

Famous

This tutorial was written on April 23,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Della Lindsey.
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using Fantasy Moments FTU Scrap kit
Called Dash of Sadness...You can download it HERE...Thank you

Mask of choice:I am using Vix PSP mask #346
You can download it HERE...Thank you Vix

Template of Choice: I am using Blissfully Beth Template #138
You can download it HERE...Thank you Beth

Filters used:Eye Candy 4000 gradient glow - HERE
Xero: Porcelain....HERE

Font for Name is Andantino Script...HERE
Copy write is always done in Pixelette ...HERE

Drop shadow use through out H-2/V-2/O-65/B-6.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination
and make the tag your own, you do not have to
use any of the supplies I used.


     LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting 


 click ok/delete background
layer

On the following raster layers follow these directions...

activate black circle layer/copy/paste paper of choice/resize
paper/go to black circle layer/invert/go to paper layer and
delete/merge down/while still activated/copy/paste tube of
choice/place the part of the tube where you want it to show
go to circle layer/selection/invert/go to tube layer/delete
duplicate tube/on original tube/blend/screen/on the duplicate
layer/place that below original tube layer/leave the frame
as is/place drop shadow on tubes and frame

activate blue circle layer/copy/paste paper of choice/resize
paper/go to blue circle layer/invert/go to paper layer and
delete/merge down/keep activated

copy/paste tube/place the part of the tube where you want it
to show/xero/porcelain/with these setting


click ok/add drop shadow

activate blue rectangle layer/copy/paste paper of choice/resize
paper/go to blue rectangle layer/invert/go to paper layer and
delete/merge down/leave the frame and word art as it is

on the vertical and horizontal  dotted lines I alternated the
colors/red/black and gray to match the tag

leave everything else in the template as it is/I moved the rest
of the layers around to suit my tag/your choice to do or not
(see my tag for reference)

now add any other element you wish to use to make your tag your
own/add drop shadow on each element

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....riggsbee53@gmail.com


tag for Blissfully Beth

PTU Raggedee Annes Scraps and Susan Justice

Fairy Tales

This tutorial was written on April 23,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Susan Justice.
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using Raggdee Annes PTU Scrap kit
Called Fairy Tales...You can purchase it HERE...Thank you Annes

Mask of choice: I am using Yez mask #55
You can download it HERE...Thank you Yez

Filters used: Eye Candy 4000 gradient glow - HERE

Font for Name is Snappy Script Light...HERE
Copy write is always done in Pixelette ...HERE

Drop shadow use through out H-2/V-2/O-65/B-6.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination
and make the tag your own, you do not have to
use any of the supplies I used.



     LET'S BEGIN

Open up new template 700x700 (we will resize later)
choose paper of choice/copy/paste/go to mask of choice
with these setting and click ok


merge group/repeat this
new layer raster/flood fill with black/add mask/place
this mask underneath the first one/move black mask
slightly to left/merge down

copy/paste frame of choice/I used element 039/resize by
120%/magic wand/click in side each window/selections/modify
expand by 6/invert/go to paper layer and delete/keep left
window selected

open close up tube/resize by 120/go to left window/copy
paste into window/choose the part you want to show/frame
selection/invert/tube/delete/selections/none/earase all
excess tube that is left/duplicate tube/mirror/place in
right window

on left tube/blend/screen/add drop shadow/on right tube
duplicate on original right tube/blend/soft light/on
duplicate tube lower opacity to 24%/place this layer
underneath the screen layer/add drop shadow to both

on middle window/click inside/selection/modify/expand by 6
copy/paste close up tube/place tube where you want that
portion to show/frame layer/selection/invert/tube layer
delete/add drop shadow/selection/none/give frame a drop
shadow

copy/paste you main tube and place where you want it/add
drop shadow/resize your tag

you can either add a word art to your tag or not...it's
up to you

now add any other element you wish to use to make your
tag your own/add drop shadow on each element

add your watermark and copyright credits/give it a slight
gradient glow/also to the name...now give your tag to a
friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my
blog send to....riggsbee53@gmail.com

4/19/12

PTU Hungry Hills and Keith Garvey

This tutorial was written on February 13th 2011. 
thought I had been posted this,but didn't..oh well
better late than never at all..posted April 20,2012
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working
 knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9
but can be adapted to use in other
Paint Shop Pro versions.





 



SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork 

of Keith Garvey..You can purchase his tubes HERE
Please do not use without a license to do so

Scrapkit or colors of your choice...I'm using Hungry Hills PTU

scrap kit Tainted. you can get it HERE...thank you

Mask of Choice: I'm using one of Insatiable Dreams #30

You can find it HERE. Put mask in mask folder
Thanks so much for the use of your mask Cat

Template of Choice: I am using one of Sara Scraps-Template51

you can get it HERE...Thanks Sara


Word art is from Sarah Hungry Hills

you can get it within the kit

Font for name is strippin dirty and copy write 

is always done in Pixelette ... Get them HERE

Drop shadow use throughout H-2/V-2/O-50/B-5.00
Filter Gradient Glow-Eye Candy 4000...HERE

Please leave a thank you when downloading for supplies.


     LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer
close all layers except the background layer...the one we'll be working on

Choose a paper of choice/copy/paste...now go to layers/Load/
save mask/load mask from disk/ and find your mask of choice...with these setting
see photo below....



go to layers/merge group

activate each layer separately with these directions below

selection/modify/expand by 1 choose a paper/
copy and paste as a new layer/resize/click on each layer and invert...then
go back to the paper layer and click delete...merge down. add drop shadow to all layers

Go to the rectangle layer/using close up/copy/paste/resize to fit/duplicate and mirror
Now right click on the layer and click on luminance legacy/on the left close up
right  click on layer and choose screen

On the square layer/Open up your 2nd close up tube of choice...resize your tube and
place on the square left/resize/now sharpen if needed and add drop shadow

on the two thin rectangles I use the scull element/resize to fit and merge down/add
drop shadow

now add any other elements of your choosing...make your tag your own, you don't
have to make it like mine...it is only a guide...don't forget to add drop shadow on
all elements.

once finish adding elements...add the main tube...don't forget to add drop shadow

now the forum tag is a miniature of the tag...the forum tag is just like the tag only
smaller so make sure you resize everything to fit....it's better to resize as you go
because it will look clearer than just resizing the original tag..so make the forum
tag from scratch, just like the tag.
I added a gradient glow to the word art so it could stand out/white then black

For the avatar I just used a background paper and the framed 

picture from the tag and added an element to it/make sure 
you make the frame picture again because this one will be smaller still

Add your copyright and watermark..and give to a friend

You're done!!!
Thanks for trying my tutorial
If you use send me a copy so I can show case it...thanks

FTU PSP Plus Scraps and Keith Garvey

Don't Play Me

This tutorial was written on April 19th 2012. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working
 knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Keith Garvey.
You can purchase his tubes HERE
Please do not use without a license to do so

Scrapkit or colors of your choice...I'm using PSP Plus Scraps-Poker
thank you for the share

Mask of Choice: I'm using one of Insatiable Dreams #126
You can find it HERE...Put mask in mask folder
Thanks so much for the use of your mask, Cat

Template of Choice: I am using one of Ali from Designz by Ali 
Template #18...Thanks Ali

Word art of choice: I'm using word art by Shappy:
Demented Hallucinationz....thanks Shappy

Font for name is BoogieNightsNF and copy write
 is always done in Pixelette ... Get them HERE


Drop shadow use throughout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies and read TOU


     LET'S BEGIN

Open up Template and ShiftD and close original
delete copyright layer close all layers
resize canvas with the following setting


we'll resize again when we're finish



Choose a paper of choice(I chose paper achtergrond)
copy/paste as new image resize to same size 
as canvas (656x475)copy/paste paper on to canvas at the
bottom/go to layers/Load/save mask/load mask from disk
and find your mask of choice...with these setting/see photo below....


 
go to layers/merge group/place beneath large circle/resize by 80%


activate large circle/resize by 80%/selection/select all/float
unfloat/modify/expand by 1/choose a paper/paste as new
 image/resize paper by 140%/check all
layers/copy and paste as a new layer on your working 
canvas/click on circle layer and invert/go back to the
 paper layer and click delete/merge down
selection none//add drop shadow


duplicated the long rectangle1/flip the copy/duplicate the
 rectangle2/flip the copy/separate the rectangles out so the 
they are underneath each other but at different angles 
(see my tag)/magic wand/click inside each one/selection
expand by 1/and add paper or color of choice/I chose a 
color from the background paper/add drop shadow to each
 after you color/merge each layer down.

activate photo1 layer/resize by 80%/selection/modify/expand by 1
choose a paper copy and paste as a new layer/click on photo1 
layer and invert/go back to the paper layer and click 
delete/merge down/add your tube of choice/place so what
you want showing is within the marching ants/go to tube 
layer and delete selection/none/(make sure you delete 
excess tube underneath canvas so it won't
show on your tag when you're finish)/add drop shadow to tube


activate photo2 layer/resize by 80%/selection/modify/expand by 1
choose a paper copy and paste as a new layer/click 
on photo2 layer and invert/go back to the paper layer and 
click delete/merge down/add your tube of choice/place so what
you want showing is within the marching ants/go to tube 
layer and delete selection/none/(make sure you 
delete excess tube underneath canvas so it won't
show on your tag when you're finish)/add drop shadow to tube



activate photo3 layer/resize by 80%/selection/modify/expand 
by 1/flood fill with color of choice/add any elements you 
want in background/resize if needed/give each a drop 
shadow/leave all frames just as they are/add drop shadow to
frames

copy/paste your main tube of choice/resize your tube 
and place where you want it add drop shadow

now add any other elements of choice from the
 kit to make it your own/and the word art

Add your copyright and watermark..and give to a friend

You're done!!!
Thanks for trying my tutorial
If you use send me a copy so I can show case it...thanks

4/10/12

FTU Bea's Creations and Alex

Perfect Pose


This tutorial was written on April 10,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.


SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Alex.
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using Bea's Creations Scrap kit
Called Angela...Bea is no longer on blogger,
please use another scrap kit...Thank you Bea

Mask of choice:I am using Weescotslass mask #297
You can download it HERE...Thank you Chelle

Template of Choice: I am using Chica's Designz -Template #7
Chica has retire from the scrappin world..
please use another template please....Thank you Chica

Filters used:Eye Candy 4000 gradient glow - HERE
Xero - Porcelaid ...HERE

Font for Name is Olive MN...HERE
Copy write is always done in Pixelette ...HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting 


and click ok/delete background layer

On the following raster layers follow these directions...
Resize each layer by 95%

activate circle frame layer/copy/paste paper of choice/go to
circle frame layer/invert/go to paper layer and delete/merge
down/add drop shadow

activate circle layer/copy/paste paper of choice/go to circle
layer/invert/go to paper layer and delete/go to adjust/hue
saturation/colorize with these settings


click ok/merge down/keep activated

copy/paste tube/place where whatever part you want showing/go to
circle layer/selection/invert/go to tube layer and hit delete
deactivate/duplicate/on original/blend/screen/on duplicate layer
place underneath original layer/add drop shadow

leave dotted layer as is/replace black doodle with bling1 from kit
resize/change target brush and color bling1 red/duplicate doodle
merge down/add drop shadow

leave back film layer as is/on film layer/adjust/hue/saturation/hue
saturation/lightness with these settings


click ok/now adjust hue
saturation/hue map with these setting

 
click ok

activate film back/mirror tube and copy/paste on top if film back
resize and place where you want to show/go to film back layer
selection/invert tube layer/delete/delete excess from around the
tube/effects/xero/porc
elaid with these setting


add drop shadow

activate square1 layer/copy/paste paper of choice/go to sqaure1
layer/selections/invert/go to paper layer and delete/merge down/
keep activated/place element of choice/resize to fit/delete/add
drop shadow to element/leave frame1 as is/add drop shadow

activate square2 layer/copy/change color to white/copy/paste element
of choice/resize to fit/on frame2/activate/change color to red/add
drop shadow to element and frame

activate square3 layer/copy/paste paper of choice/go to sqaure3 layer
selections/invert/go to paper layer and delete/merge down/leave frame
layer as is/add drop shadow to frame

active each heart layer and color a different color red/add drop shadow

activate word art1 and change color to red/add drop shadow/activate word
art2 and change color to white/give a gradient glow to it in red/add drop
shadow

now add you main tube/place where it looks best/resize if needed/add
drop shadow

now add any other element you wish to use to make your tag your
own/add drop shadow on each element

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....riggsbee53@gmail.com


4/8/12

PTU Hungry Hills and Anna Marine

Tainted Too

This tutorial was written on April 6,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Anna Marine.
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using Hungry Hills PTU Scrap kit
Called Tainted...You can purchase it HERE...Thank you Ali

Mask of choice:I am using Vix PSP mask #451
You can download it HERE...Thank you Vix

Template of Choice: I am using Tag Template and More -Template #116
You can download it HERE....Thank you Rosey

Filters used:Eye Candy 4000 gradient glow - HERE
Graphic Plus-Spot Lite...HERE

Font for Name is OCR-A...HERE
Copy write is always done in Pixelette ...HERE


Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting 



and click ok/delete background layer

On the following raster layers follow these directions...

activate circle1 layer/copy/paste paper of choice/go to
circle1 layer/invert/go to paper layer and delete/merge
down/add drop shadow

activate circle2 layer/copy/paste paper of choice/go to
circle2 layer/invert/go to paper layer and delete/merge
down/keep activated

copy/paste close up tube/place where whatever part you want
showing/blend/screen/add drop shadow

copy paste whatever element you want to choose/I chose the
rose/place on top near the top of the circle/resize to fit
add drop shadow

activate rectangle layer/copy/paste paper of choice go to
rectangle layer/invert/go to paper layer and delete/merge
down/add drop shadow

copy/paste another element of choice/I used the leaves/resize
duplicate/place side by side/merge down/add drop shadow

leave white rectangle layer as is/copy/paste blood spatter/duplicate
and mirror/merge down/add drop shadow

activate circle3 layer/copy/paste tube circle with background/
resize to fit/graphic plus/spot lite/with these setting/click ok
add drop shadow

activate circle4 layer/copy/paste tube circle with background/
resize to fit/graphic plus/spot lite/with these setting



click ok/add drop shadow

activate sm circle layer/copy/paste paper of choice/go to sm circle
layer/invert/go to paper layer and delete/merge down

activate sm circle2 layer/copy/paste paper of choice/go to sm circle2
layer/invert/go to paper layer and delete/merge down

activate double rectangle layer/copy/paste paper of choice/go to double
rectangle layer/invert/go to paper layer and delete/merge down

activate square1 layer/copy/paste paper of choice/go to square1 layer
invert/go to paper layer and delete/merge down

activate square2 layer/copy/paste paper of choice/go to square2 layer
invert/go to paper layer and delete/merge down

activate circle5 layer/copy/paste paper of choice/go to circle5 layer
layer/invert/go to paper layer and delete/keep activated

copy/paste/close up tube/resize to fit where you want it/add drop shadow

activate rectangle3 layer/copy/paste paper of choice/go to rectangle3
layer/invert/go to paper layer and delete/merge down/leave strip and
frame as is

now add any other element you wish to use to make your tag your
own/add drop shadow on each element

you can either add a word art to your tag or not...it's up to you

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....riggsbee53@gmail.com


4/6/12

PTU Hungry Hills and Sherri Baldy


Adorable

This tutorial was written on April 5,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Sherri Baldy.
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using Hungry Hills PTU Scrap/tube
bundle by Sherri Baldy Package #6...You can purchase it HERE
Thank you Ali

Mask of choice:I am using Horse Play's Pasture mask #37
You can download it HERE...Thank you Bev.

Template of Choice: I am using Denz Designz - Template #168
You can download it HERE....Thank you Denny

Filters used:Eye Candy 4000 gradient glow - HERE
Xero - Fritillary and Soft Mood - HERE

Font for Name is Market...HERE
Copy write is always done in Pixelette ... HERE


Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.

     LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting and click ok


delete background layer

On the following raster layers follow these directions...
First resize canvas to 850 x 850 so you'll have room to work
next, resize each layer by 120 two times

activate rectangle layer/copy/paste paper of choice/go to
rectangle layer/invert/go to paper layer and delete
merge down/keep activated

copy/paste close up tube/place where whatever part you want
showing/duplicate 3x/delete the excess from each tube/merge
down each tube/duplicate again on original/blend/screen/on
duplicate lower opacity to 60%/add drop shadow to both

activate long rectangle layer/copy/paste paper of choice/go
to long rectangle layer/invert/go to paper layer and delete
merge down/add drop shadow

copy paste whatever element you want to choose/I did the tree
resize to fit/add drop shadow

activate long thin rectangle layer/copy/paste paper of choice
go to long thin rectangle layer/invert/go to paper layer and
delete/merge down/add drop shadow

copy/paste another element of choice/I used the heart/resize
duplicate 2x/place below one another/merge  down each layer
add drop shadow

activate short rectangle layer/copy/paste paper of choice/go
to short rectangle layer/invert/go to paper layer and delete
merge down/keep activated

copy/paste/another element of choice/I chose bow4/resize
duplicate/place side by side/merge down/add drop shadow

activate square layer/copy/paste paper of choice/go to square
layer/invert/go to paper layer and delete/merge down

copy/paste/close up tube/resize to fit where you want it
xero soft mood with these setting/click ok/


now go to xero/fritillary
with these setting and click ok


add drop shadow

next I used a frame instead of the dotted frame/resize to fix
add drop shadow/change the color of the heart to match your tag
add drop shadow/also change the color to the dotted doodle/also
add drop shadow

activate circle layer/copy/paste paper of choice/go to circle
layer/invert/go to paper layer and delete/merge down/keep
activated/copy/paste element of choice/I used the posey/resize
to fit/add drop shadow/change the color of the circle frame
add drop shadow to circle frame

copy/paste your main tube/place where you think it will look
best/resize if needed/add drop shadow

now add any other element you wish to use to make your tag your
own/add drop shadow on each element

you can either add a word art to your tag or not...it's up to you

I added the paper on the name to match the word art

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....riggsbee53@gmail.com

4/5/12

PTU Hungry Hills and Ted Hammond

This tutorial was written on April 5,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Ted Hammond.
Please do not use unless you have a license to do so.
You can get his tubes HERE

Scrapkit of Choice: I am using PTU Hungry Hills Scrap kit
called Cherry Pie...You can purchase it HERE..Thank you Ali

Mask of choice:I am using Insatiable Dreams mask #406.
You can download it HERE...Thank you Cat

Template of Choice: I am using Toxic Desire-Template #100
You can download it HERE....Thank you Kristin

Filters used:Eye Candy 4000 gradient glow - HERE


Font for Name is Florentine Swash Caps...HERE
Copy write is always done in Pixelette ...HERE

Drop shadow use through out H-2/V-2/O-65/B-6.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.

     LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting 



and click ok/delete background layer

On the following raster layers follow these directions...

activate circle layer/copy/paste paper of choice/go to circle layer
invert/go to paper layer and delete/merge down/keep activated

copy/paste tube background/resize/place within circle/duplicate/on main layer
blend/screen/on duplicated layer/opacity 66%/place duplicate layer on top on
original layer/now take your warp tool with these setting


 Size - 63...Hardness - 0....Strength - 100...Step - 25...Noise - 1

take your warp tool and use to and you're bringing the top part
 of the tube to the top of the circle, along with the stool 
and both ends of the table.(example below)



activate rectangle1 layer/copy/paste paper of choice/go to rectangle1 layer
invert/go to paper layer and delete/merge down/add drop shadow

activate square1 layer/copy/paste paper of choice/go to square1 layer
invert/go to paper layer and delete/merge down/add drop shadow

now add any other element you wish to use to make your tag your own/add drop
shadow on each element

you can either add a word art to your tag or not...it's up to you

add your main tube and place where you want it to be/add drop shadow/resize
your tag if needed

add your watermark and copyright credits/give it a slight gradient glow
also to your name...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....riggsbee53@gmail.com


4/4/12

FTU Kittz Kreationz and Elias Chatzoudis

Roll Me Over

This tutorial was written on March 28,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

 
SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Elias Chatzoudis.
Please do not use unless you have a license to do so.
You can get his tubes HERE

Scrapkit of Choice: I am using FTU A Little Irish Charm Scrap kit by
Kittz Kreationz...You can download it HERE..Thank you Kittz

Mask of choice:I am using Crys St. Paddy's mask.You can download
it HERE...Thank you Cry

Template of Choice: I am using Dee's Sign Depot Template #1..
Thank you Dee...HERE

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Splendid...HERE
copy write is always done in Pixelette ...HERE

Drop shadow use through out H-2/V-2/O-65/B-6.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.



     LET'S BEGIN

Resize 700x700/ this will give you space to work/We'll
resize at the end

Open up Template and ShiftD and close original/Resize 700x700
this will give you space to work/We'll resize at the end
delete copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting 


and click ok/delete background layer

On the following raster layers follow these directions...

activate circle layer/copy/paste paper of choice/go to circle layer
invert/go to paper layer and delete/merge down/keep activated

copy/paste element flower2/resize if needed/duplicate/move where you
want it/merge down/blend screen/deactivate/add drop shadow

activate left circle layer/copy/paste paper of choice/go to left circle
layer/invert/go to paper layer and delete/merge down/keep activated

copy/paste heart3/resize if needed/duplicate several times/move where you
want it/merge down/blend soft light/deactivate/add drop shadow

leave the 2 large black squares as is/copy/paste any element you want on
top/resize if needed/add drop shadow

activate top grey strip layer/copy/paste paper of choice/go to top grey
strip layer/invert/go to paper layer and delete/merge down/add drop shadow

activate ellipse layer/copy/paste paper of choice/go to ellipse layer
invert/go to paper layer and delete/merge down/add drop shadow

activate dark grey layer/copy/paste paper of choice/go to dark grey layer
invert/go to paper layer and delete/merge down/keep activated/copy/paste
close up tube/resize/go to tube layer/delete/blend/hard light/deactivate
add drop shadow

activate small circle layer/copy/paste paper of choice/go to small circle layer
invert/go to paper layer and delete/keep activated/copy/paste close up
tube of the face will show/deactivate/blend/screen/add drop shadow/leave
dotted circle as is

leave the two white squares and two black square as is/leave clover in top
square/add drop shadow/on bottom square/copy/paste tube/resize/sharpen if
needed/add drop shadow

activate top grey strip layer/copy/paste paper of choice/go to top grey
strip layer/invert/go to paper layer and delete/merge down/add drop shadow
place this strip on top of tube layer so the bottom of the tube doesn't
show/leave the word art layer as is.

Add any elements you wish to use to make your tag personal to you.
add drop shadow to all elements.

once you finish decorating your tag/resize to your liking

add your watermark and copyright credits/give it a slight gradient glow
...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to riggsbee53@gmail.com

4/3/12

FTU Bea's Creations and Michael Miles



Teasing
This tutorial was written on April 2, 2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Michael Miles.
Please do not use unless you have a license to do so.
You can get his tubes HERE

Scrapkit of Choice: I am using Bea's Creation  Scrap kit
called Innocent Blue...Thank you Bea

Mask of choice:I am using Insatiable Dreams mask #181.
You can download it HERE...Thank you Cat

Template of Choice: I am using Divine Intentionz- Template #384
You can download it HERE....Thank you Missy

Filters used:Eye Candy 4000 gradient glow - HERE
Xero - Radiance....HERE

Font for Name is Post AntiquaBE -Medium ...HERE
copy write is always done in Pixelette ...HERE

Drop shadow use through out H-2/V-2/O-65/B-6.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to use any
of the supplies I used.Because this template has 
a lot of layers, it is best to name your layers 
as you go so you don't get confused

     LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting


 and click ok/delete background layer

On the following raster layers follow these directions...

activate long rectangle layer/copy/paste paper of choice/go to long
rectangle layer/selection/invert/go to paper layer and delete paper
delete bottom layer/keep activated

copy/flower1/resize/duplicate 3x/blend screen/merge all layers/add drop
shadow

activate square layer/copy/paste paper of choice/go to square layer
selection/invert/go to paper layer and delete paper/delete bottom layer
keep activated

copy/paste tube closeup/resize to fit square layer/blend/screen/add
drop shadow

activate square2 layer/copy/paste paper of choice/go to square2 layer
selection/invert/go to paper layer and delete paper/delete bottom layer
keep activated

copy/paste tube closeup/resize to fit square layer/blend/screen/add
drop shadow

leave oval background layer as is/resize by 85%/activate oval layer
resize by 85%/copy/paste/paper of choice/go to oval layer/selection
invert/now go back to paper layer and delete/delete bottom oval layer
Keep activated

copy/paste tube closeup/resize to fit oval layer/lower opacity to 40%
add drop shadow

activate small rectangle layer/copy/paste paper of choice/go to small
rectangle layer/selection/invert/go to paper layer and delete paper/delete
bottom layer/add drop shadow

copy/paste heart3/resize to fit layer/duplicate and place underneath the
first heart/merge down/add drop shadow/duplicate/mirror and close

leave medium circle layer as is/resize by 85%/activate medium circle layer/copy
paste paper of choice/go to medium circle/selection/invert/go to paper layer
and delete keep activated/copy/paste main tube without chair/resize to fit
what you want to show/xero/radiance with these setting

add drop shadow to tube and circle

activate small rectangle2 layer/copy/paste paper of choice/go to small
retangle2 layer/selection/invert/go to paper layer and delete paper/delete
bottom layer/add drop shadow/now open mirror double hearts and place on top
of small rectangle2 layer

activate long rectangle2 layer/copy/paste paper of choice/go to long
rectangle2 layer/selection/invert/go to paper layer and delete paper/delete
bottom layer/keep activated

copy/flower5/resize/duplicate 4x/merge all layers/blend/overlay/add drop
shadow

leave rectangle frame as is/color the frame to match tag/add drop shadow

leave small circle background as is/activate small circle layer/copy/paste
paper of choice/go to small circle layer/selection/invert/paper layer and
delete/keep activated/copy/paste main tube/resize to fit where you want
go to small circle layer/selection/invert/go to tube layer and delete/add
drop shadow

activate long rectangle3 layer/copy/paste paper of choice/go to long
rectangle3 layer/selection/invert/go to paper layer and delete paper/delete
bottom layer/keep activated

copy/paste/beadline on top/resize to fit/add drop shadow/ leave word art
back and word art as is/add drop shadow

now add your main tube and place where you want it/add drop shadow

now add any other element you wish to use to make your tag your own/add drop
shadow on each element/resize your tag if needed

add your watermark and copyright credits/give it a slight gradient glow
...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to riggsbee53@gmail.com